Solo 1064 Series

Solo 1064 Series CW DPSS lasers boast output powers up to 2000 mW with unrivalled single frequency performance. This versatile NIR wavelength finds use a range of demanding scientific and industrial applications, including Raman spectroscopy, metrology and lithography.

Specifications

Operation

CW, SLM

Spatial Mode

TEM00

Wavelength

1064 nm

Output Power (fixed value within range)

10 - 2000 mW

Output Power Stability (8h operation)

≤ 2.0 %

Output Power Noise (10 Hz - 10 MHz)

≤ 0.1 % RMS

Coherence Length

> 100 m

Spectral Stability (8h operation)

± 1.0 pm

Linewidth (1/e  )

2

≤ 0.5 MHz

Beam Diameter at Output Aperture

0.8 - 1.2 mm

Beam Divergence

≤ 1 mrad, diffraction limited

Beam Pointing Stability

≤ 5 µrad/°C

Polarisation (linear, vertical)

≥ 100:1

Conditions

Operating Temperature

18 - 30 °C

Thermal Interface Stability

± 1.5 °C

Storage Temperature

0 - 50 °C

Humidity

5 - 95 %, non-condensing

Electrical

Warm-up Time (output power-dependent)

5 - 30 mins

Supply Voltage

19 V DC

Power Consumption (max.)

< 200 W

Dimensions

Laser Head (L x W)

225 x 80 mm

Controller (max. L x W x H)

243 x 170 x 54 mm

Beam Height (Centre of Aperture)

75 mm

Power Cable Length

2 m

Safety

Classified per IEC60825-1

Regulatory

FDA certified

EU Preference Exports to EFTA countries

Downloads

Optional Extras

  • Water Cooling

    For specialised applications that demand minimal perturbance and vibration, we offer a water cooling solution  utilising a high performance thermo-electric chiller. Should your cooling needs change in the future, the water cooling loop can simply be disconnected from the pedestal and the laser head may be cooled passively.

    This option replaces our standard passive cooling pedestal. 

  • Software Control

    If you require greater control and monitoring of your laser's parameters, consider our PC  control interface. Depending on your requirements, users are able to turn the connected laser on and off, refine output power and monitor performance.

    We also offer a remote diagnostics option so our laser engineers can monitor the performance of your laser and make necessary adjustments, without the need for a call-out.

Request a Price Quote

Interested in a Solo 1064 Series laser for your application? Please get in touch via the contact form with your particular requirements, and we'll get back to you shortly.

Telephone:

+44 (0)131 281 2778

Email:

© 2020 UnikLasers Ltd. 

BRaMMS Technology® trade mark no. UK00003361361

tel: +44 (0)131  333 2200